Skip to main content
Great news for iPhone users — Apple has made eSIM installation about as smooth as it gets. eBanano eSIMs are compatible with iPhone XS and later, which covers everything from the XS and XR all the way through the latest models. There are two ways to install: scanning the QR code from your email (the quick and easy way) or entering your plan details manually. Both work perfectly — pick whichever feels right for you.

​
Install Your eSIM

This is the fastest way to get set up. Grab the QR code from your eBanano confirmation email and follow these steps.
1

Open Settings and go to Cellular

On your iPhone, open the Settings app, then tap Cellular (it may also appear as Mobile Service or Mobile Data depending on your region).
2

Tap Add eSIM

Scroll down and tap Add eSIM. If you already have a physical SIM in your phone, you’ll still see this option — your eSIM will live alongside it.
3

Choose Use QR Code

Tap Use QR Code. Your iPhone’s camera will open. If asked, allow camera access.
4

Scan the QR code from your eBanano email

Hold your phone’s camera over the QR code in your email until your iPhone recognises it. You should feel a small vibration or see a confirmation pop-up. Make sure the code is well-lit and your camera isn’t too close or too far away.
5

Tap Add Cellular Plan

Once the QR code is scanned, a prompt will appear asking you to confirm. Tap Add Cellular Plan to download your eBanano eSIM to your device.
6

Label your eSIM

iOS will ask you to give this plan a label. We recommend something like “eBanano — Italy” or “eBanano — Japan” so you can spot it instantly when switching plans. You can always rename it later in Settings.
7

Choose when to use this plan

iOS will ask whether to use this eSIM for calls, messages, and/or data. Since eBanano is a data-only plan, select it for Cellular Data only. Keep your primary SIM as your default for calls and texts.
Label your eSIM with your destination (e.g. “eBanano — France”) — it makes switching between your home SIM and travel eSIM a breeze, especially if you’re hopping between countries on the same trip.

​
Set Up Your Data Settings

Installing the eSIM is only half the job. You’ll need to make sure your iPhone is actually pointed at eBanano for data when you’re abroad. Here’s how to configure it:
1

Go to Settings > Cellular

Open Settings and tap Cellular.
2

Select your eBanano eSIM

Under your list of plans, tap the eBanano eSIM you just installed.
3

Enable Turn On This Line

Make sure the Turn On This Line toggle is switched on. If it’s off, your eSIM won’t be active at all.
4

Set eBanano as your Cellular Data source

Go back to the main Cellular screen, tap Cellular Data, and select your eBanano eSIM. This tells your iPhone to use eBanano’s network for all data while abroad.
5

Enable Data Roaming

With your eBanano eSIM selected, tap into it and turn on Data Roaming. This is essential — without it, your phone won’t connect to local networks abroad, and you won’t get any data.
Don’t forget to enable Data Roaming on your eBanano eSIM line. It sounds counterintuitive, but even with a travel eSIM you need this setting switched on. Without it, your phone won’t connect to local partner networks when you’re overseas, and you’ll be left without data. Double-check this before you board your flight!

Overview & First Steps

Not sure where to start? Review the prerequisites and general installation process.

Activation Guide

Learn the difference between installation and activation, and how to get your plan running when you land.
Last modified on September 11, 2026